Audio Technica ES905CL Cardioid Condenser Rigid-Pipe Microphone

Wikispecs.org - The Largest Product Database,the biggest product specifications database in the world

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included. Designed for high-quality sound reinforcement, professional recording and broadcasting

Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle

Rigid-pipe design with ball-in-socket base permits flexible positioning

Sturdy metal base mounts to table, desk or podium with included hardware

Superior off-axis rejection for maximum gain before feedback

Requires 11V to 52V DC phantom power

UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

RoHS compliant—free from all substances specified in the EU directive on hazardous substances

[edit] Specs

ELEMENT Fixed-charge back plate permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 60-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY –38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 111 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 67 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
WEIGHT (MICROPHONE) 330 g (11.6 oz)
WEIGHT (POWER MODULE) 81 g (2.9 oz)
DIMENSIONS (MICROPHONE)
- 523.4 mm (20.61") long
- 24.6 mm (0.97") head diameter
DIMENSIONS (POWER MODULE)
- 92.9 mm (3.66") long,
- 18.9 mm (0.74") diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°);
UE-O omnidirectional (360° )
ACCESSORIES FURNISHED AT8538 power module; (3) #8 x 1" black oxide wood screws for microphone mount
AUDIO-TECHNICA CASE STYLE M37